Metal Stamping

Plouse’s state-of-the-art manufacturing facility contains various metal stamping machines. Metal stamping is a fabricating process that can compete with roll forming that presses a metal blank with powerful dies into a predetermined shape (or pattern). Stamping utilizes mechanically or hydraulically powered presses that are fed by continuous strips of metal or individual blanks which are shaped by a powerful stamping action.

Plouse specializes in both high and low volume metal stamping production using a variety of materials that range from .005" to .250" thick. Hard tool configurations can take the form of inexpensive punching or forming dies to very large complex fully progressive tools, and become necessary to drive piece part costs down and to meet tight tolerance requirements. All dies are designed, built and maintained in-house by our master toolmakers. View our full equipment list here.

Metal Stamping Presses

Heim OBI 120 ton 33" x 30" bed, 11.5" shut height, 50 spm
Verson 5B27 on 26" x 32" bed, 12" shut height, 40 spm
Perkins OBI 60 ton 20.5" x 31" bed, 13.75" shut height, 145 spm
Perkins OBI 28 ton 12" x 22" bed, 8.5" shut height, 190 spm
V&O OBI 25 on 22" x 13" bed, 7.5" shut height, 240 spm
Benchmaster 5 ton 8" x 8" bed, 6" shut height, 20 spm

Click Here to Learn More About Metal Stamping